When remodeling, the 6032BW acrylic whirlpool bathtub fits or replaces the standard fiberglass one piece unit found in most homes that occupy a 60 X 32 space. This tub has two arm rests and a soap dish designed into the acrylic. Its 5 foot length and 32 inch width make it a perfect replacement for any standard size tub.
A beautiful bathtub for the smallest of spaces! WaterTech manufactures three models that are 60” in length and 32” in width. These are the 6032BW, 6032 Ultra and our exclusive top overflow bath the 6032 Elite which provides the deepest water depth of any model 60” long and 32” wide. All WaterTech 6032 baths are excellent choices for individuals wanting to replace an existing fiberglass, one piece tub/shower with an acrylic jacuzzi style whirlpool. If a shower is desired, it can be incorporated into a shower/bath design in all our models.
Four inches wider than a standard jacuzzi style whirlpool bathtub. This jetted tub’s dimensions are 60 X 36. Perfectly suited for narrow spaces and one person. Three back jets provide a powerful back massage and four jets massage the legs, hips, knees and torso. Two jets provide the feet, ankles, toes and soles of the feet a comforting water massage. The top deck of the tub has two sculptured areas designed to conveniently hold soap, shampoo, conditioner etc.
This elegant jetted tub’s oval shape is 60” long and 42” at its widest points. The tub was designed to be deeper than most other jacuzzi style tubs the same size and accommodates one person. For those wanting even a deeper water depth, the tub can be ordered with an optional press-flow drain/overflow assembly that will increase the water depth an additional 3”.
A very popular jacuzzi style one person whirlpool bath! We have 4 models of the 6042 jetted tubs: the 6042 Elite, 6042EOW (oval shape), 6042 GW, and the 6042 SW. The 6042 GW is the only 6042 whirlpool that has two clear acrylic grab rails designed into the acrylic tub.
Wide tapered arm rests and a sculptured seating area, in the floor of the tub, cradle your body. A 5’ tub with a large deck area where a faucet can be installed. This jetted tubs rectangular shape is perfect for those wanting to place a shower over it.
By adding 1” to the width of a 60” long and 42” wide tub, we have created a very popular 60 X 43 two person tub that doesn’t require excessive width in the bathroom. A narrow top deck, approximately 2” wide, is designed so the internal bathing area could be enlarged to comfortably seat two people sitting face to face.
Large two person whirlpool tub with outside dimensions of 60 inches by 48 inches (6048). Persons bathing in the 6048 Elite therapy bath face each other and have plenty of room to stretch their legs. This beautiful design has a center drain with a top overflow design. Purchasing a bath with a top overflow allows the tub to be filled 20% more than a standard side overflow design. WaterTech is the only manufacturer that incorporates a top overflow into their tubs.
This extra deep, two person tub has a roomy open shape with eight adjustable jets. All of the jets are recessed and a convenient seat compliments this bath. All back and neck jets are recessed in all whirlpool, combination and air baths. A free pulsating jet, interchangeable with any jet in the tub, is provided with each bath and can be changed out in a matter of seconds and delivers a rotating - pulsating massage action usually only found in hot tubs and spas.
The whirlpool 6060 NS tub has beautiful functional features everywhere you look. Designed for two bathers to sit at 90 degrees to each other, facing the same corner, their feet together in the foot well, the interior of this tub is structured to allow each bather “solo” relaxation capability even while sharing the bath with their partner
Elegant two person jetted tub design! Three distinct sitting areas provide massages from different directions. Each bather’s sitting area has a raised headrest. The flowing curves of this spacious design will enhance any bathroom. 19 high pressure jets massage the entire body from the neck to the toes.
Need a little more leg room than the average 60 inch bathtub provides? This 66 inch tub has it!
Why not take advantage of every inch of space you’ve got? The whirlpool bath 66x32 whirlpool bath was designed to allow maximum use of an in-between space. If you have an alcove or island space larger than 60 inches but not quite long enough for a 72 inch tub, this tub might be exactly what you need. For taller bathers or when stretching out for a relaxing whirlpool at the end of a hard day.
At 32 inches of width, this tub is perfect for remodelers looking to replace an older model tub but where an additional six inches of length is possible. Compared to bathing in an old 60 inch tub the 66x32 tub will make you feel like a King. Plenty of water depth and built in arm rests provide superior comfort and bathing security while the smooth top deck ensures ease of cleaning.
Not every bathroom has space for a 72 inch whirlpool tub so maximizing use of available space is critically important in tight quarters. Don’t settle for a 60 inch whirlpool when you can squeeze in a 66 inch long one. It’s not too big, not too small. The 66x32 is just right.
This tub is perfect for overhead shower alcove installation or it can be dropped into an island cabinet of tile or wood. With seven jets and a standard two horsepower pump this tub delivers big tub performance in limited space.