C6042 GW Combination Bathtub

Description

The C6042GW is a popular jacuzzi-style one person airbath/whirlpool combination bathtub. Other available 60”x42” airbath/whirlpool models that Watertech manufactures have different features, water depths and shapes. They are the C6042 Elite, the C6042EOW (oval shaped) and the C6042SW. All C6042 models, except the C6042EOW, are rectangular in shape and can easily have a shower incorporated into the design. The C6042GW has two clear acrylic grab rails 1” in diameter and 9” in length, perfect for individuals that require some assistance getting in and out of the bathtub. 2 stacked back jets and 6 additional jets provide the body a high pressure water massage. Air jets (injectors) located in the floor provide a soothing soft tissue non-aggressive air massage. On combination baths all the water jets are fully directional and the jet’s scalloped face can be rotated allowing the bather to increase or decrease the water flow and pressure from each jet. A three speed control (high-medium-low) is standard on all combo baths giving the bather complete control of the water flow and pressure from all the water jets simultaneously. For your comfort all back and neck jets are recessed in all Watertech whirlpools and combination bathtubs. The water lines on combo baths are rigid PVC, U.L. certified for 100% drainage assuring a clean and sanitary massage experience each and every time the bath is used. A free pulsating jet is provided with each combo bath and can be easily interchanged with any water jet in a matter of seconds. The pulsating jet is a feature usually found only in hot tubs and spas. The measurements are 60” in length and 42 ” in width. The C6042GW combo bath, a combination air bath and whirlpool bath, has 17 watertight air injectors with 119 air ports and 8 water jets. Each injector has an internal check valve that insures water never enters any part of the air system (blower, air lines, or air manifold etc). We recommend anyone buying an air bath or combination air/whirlpool bath review and understand the differences between Watertech’s injector baths and other air baths that are manufactured by eliminating air injectors and simply drilling holes through the bottom of the tub into an unserviceable air channel under the tub. All combo baths have a blower powered air system and pump powered water system that can be operated independent of each other or used at the same time. The bather gets to select from three massages – air, water or combination of air and water. Additional information can be found on our website or in our product catalogue. All Watertech combination baths are equipped with injectors (air jets) in the floor and hydrotherapy water jets in the walls of the bathtub, two entirely different massages that can be used separately or together.Specification Sheets C6042 GW Specification Sheet . Watertech-Installation-Booklet PDF Format Specifications Size: 60″ x 42″ Pump: 7 amp Lifetime Warranty Electronic Controls Blower Size: 8 amp, Variable Speed, 300 Watt Heated Blower Purge Cycle: Activates twenty minutes after bath is switched off. Dries lines, manifold and injectors Hydrotherapy Spa Jets: 8 Air Injectors: 119 air ports from 17 injectors Injectors have integral watertight check valves Min/Max gallons vary, depending on bather size Includes on/off air switch Includes 3 speed pressure controller (A $75 value) All water lines are plumbed completely with rigid schedule 40 PVC pipe (no flex hose) Shipping Weight: 162 lbs (price does not include shipping) Tub shown with optional polished brass trim; additional photos show whirlpool jets only