C6060 Combination Bathtub

Description

A two person corner acrylic whirlpool/airbath combination. This combination bath has spacious interior bathing so the bathers can side by side or face to face. 8 water jets provide a high pressure massage and air jets (air injectors) in the floor provide a soothing air massage. A convenient corner seat gives the bather a space to sit and let jets and injectors massage the feet, legs, ankles etc. Watertech has two other corner models available with different dimensions: the C6262 and the C6464. On combination baths all the water jets are fully directional and the jet’s scalloped face can be rotated allowing the bather to increase or decrease the water flow and pressure from each jet. A three speed control (high-medium-low) is standard on all combo baths giving the bather complete control of the water flow and pressure from all the water jets simultaneously. For your comfort all back and neck jets are recessed in all Watertech whirlpools and combination bathtubs. The water lines on combo baths are rigid PVC, U.L. certified for 100% drainage assuring a clean and sanitary massage experience each and every time the bath is used. A free pulsating jet is provided with each combo bath and can be easily interchanged with any water jet in a matter of seconds. The pulsating jet is a feature usually found only in hot tubs and spas. The measurements are 60” in length and 60 ” in width. The C6060 combo bath, a combination air bath and whirlpool bath, has 23 watertight air injectors with 161 air ports and 8 water jets. Each injector has an internal check valve that insures water never enters any part of the air system (blower, air lines, or air manifold etc). We recommend anyone buying an air bath or combination air/whirlpool bath review and understand the differences between Watertech’s injector baths and other air baths that are manufactured by eliminating air injectors and simply drilling holes through the bottom of the tub into an unserviceable air channel under the tub. All combo baths have a blower powered air system and pump powered water system that can be operated independent of each other or used at the same time. The bather gets to select from three massages – air, water or combination of air and water. Additional information can be found on our website or in our product catalogue. All Watertech combination baths are equipped with injectors (air jets) in the floor and hydrotherapy water jets in the walls of the bathtub, two entirely different massages that can be used separately or together.Specification Sheets C6060 Specification Sheet . Watertech-Installation-Booklet PDF Format Specifications Size: 60″ x 60″ Pump: 7 amp Lifetime Warranty Blower Size: 8 Amp, Variable Speed, 300 Watt Heated Blower Purge Cycle: Activates twenty minutes after bath is switched off. Dries lines, manifold and injectors Electronic Controls Hydrotherapy Spa Jets: 8 Air Injectors: 161 air ports from 23 injectors Injectors have integral watertight check valves Min/Max gallons vary, depending on bather size Includes on/off air switch Includes 3 speed pressure controller (A $75 value) All water lines are plumbed completely with rigid schedule 40 PVC pipe (no flex hose) Shipping Weight: 193 lbs (price does not include shipping) Manifold System: Manifold contains check valve protection. Water never enters any part of the air system. Tub shown with optional polished brass injectors. An extended spout is needed if spout is wall mounted Drain included in tub price – specify finish Tub shown with optional polished brass trim; additional photos show only whirpool jets