C7245 Combination Bathtub

Description

One of our most popular two person acrylic jacuzzi-style bathtubs. Bathers sit facing each other with ample leg room. 5 water jets massage each bathers back, 6 water jets provide a high pressure massage of the feet legs and body. On combination baths all the water jets are fully directional and the jet’s scalloped face can be rotated allowing the bather to increase or decrease the water flow and pressure from each jet. A three speed control (high-medium-low) is standard on all combo baths giving the bather complete control of the water flow and pressure from all the water jets simultaneously. For your comfort all back and neck jets are recessed in all Watertech whirlpools and combination bathtubs. The water lines on combo baths are rigid PVC, U.L. certified for 100% drainage assuring a clean and sanitary massage experience each and every time the bath is used. A free pulsating jet is provided with each combo bath and can be easily interchanged with any water jet in a matter of seconds. The pulsating jet is a feature usually found only in hot tubs and spas. The measurements are 72” in length and 45” in width. The C7245 combo bath, a combination air bath and whirlpool bath, has 30 watertight air injectors with 259 air ports and 16 water jets. Each injector has an internal check valve that insures water never enters any part of the air system (blower, air lines, or air manifold etc). We recommend anyone buying an air bath or combination air/whirlpool bath review and understand the differences between Watertech’s injector baths and other air baths that are manufactured by eliminating air injectors and simply drilling holes through the bottom of the tub into an unserviceable air channel under the tub. All combo baths have a blower powered air system and pump powered water system that can be operated independent of each other or used at the same time. The bather gets to select from three massages – air, water or combination of air and water. Additional information can be found on our website or in our product catalogue. All Watertech combination baths are equipped with injectors (air jets) in the floor and hydrotherapy water jets in the walls of the bathtub, two entirely different massages that can be used separately or together.Specification Sheets C7245 Specification Sheet . Watertech-Installation-Booklet PDF Format Specifications Size: 72″ x 45″ Pump Size: Two (2) 7 Amp Lifetime Warranty Blower Size: 8 Amp, Variable Speed, 300 Watt Heated Blower Purge Cycle: Activates twenty minutes after bath is switched off. Dries lines, manifold and injectors Electronic Controls Hydrotherapy Spa Jets: 16 Air Injectors: 259 air ports from 37 injectors Injectors have integral watertight check valves Manifold System: Manifold contains check valve protection. Water never enters any part of the air system. Tub shown with optional polished brass injectors. Min/Max gallons vary, depending on bather size Includes dual electronic on/off air switches Includes 3 speed pressure controller (A $75 value) All water lines are plumbed completely with rigid schedule 40 PVC pipe (no flex hose) Shipping Weight: 210 lbs (price does not include shipping) Tub shown with optional polished brass trim; additional photos only show whirlpool massage jets. Specification Sheets C7245 Specification Sheet . Click here for the complete instructions booklet PDF Format