C7248 Elite Combination Bathtub

Description

The C7248 Elite two person combination air and water hydrotherapy bathtub allows bathers to sit side by side. Extra leg room is provided for each bather by gently curving the foot end of the tub. Six recessed water jets massage the bathers back area with six additional water jets, located in the walls of the tub, provide an aggressive water massage. The floor air injectors (air jets) in this bathtub complete the full body massage experience. Rounding the tubs corners gives a pleasing visual design to any bathroom. Watertech’s exclusive top overflow design allows all Elite combo baths to be filled within 2 inches of the top of the bathtub insuring the bather gets an extra deep full body massage while a Jacuzzi-style bathtub with a standard side overflow has a water bathing level 4” – 6” inches below the top of the bathtub. The water jets are fully directional and the jet’s scalloped face can be rotated allowing the bather to increase or decrease the water flow and pressure from each jet. A three speed control (high-medium-low) is standard on all combo baths giving the bather complete control of the water flow and pressure from all the water jets simultaneously. For your comfort all back and neck jets are recessed in all Watertech whirlpools and combination bathtubs. The water lines on combo baths are rigid PVC, U.L. certified for 100% drainage assuring a clean and sanitary massage experience each and every time the bath is used. A free pulsating jet is provided with each combo bath and can be easily interchanged with any water jet in a matter of seconds. The pulsating jet is a feature usually found only in hot tubs and spas. The measurements are 72” in length and 48” in width. The C7248 Elite combo bath, a combination air bath and whirlpool bath, has 30 watertight air injectors with 210 air ports and 12 water jets. Each injector has an internal check valve that insures water never enters any part of the air system (blower, air lines, or air manifold etc). We recommend anyone buying an air bath or combination air/whirlpool bath review and understand the differences between Watertech’s injector baths and other air baths that are manufactured by eliminating air injectors and simply drilling holes through the bottom of the tub into an unserviceable air channel under the tub. All combo baths have a blower powered air system and pump powered water system that can be operated independent of each other or used at the same time. The bather gets to select from three massages – air, water or combination of air and water. Additional information can be found on our website or  in our product catalogue. All Watertech combination baths are equipped with injectors (air jets) in the floor and hydrotherapy water jets in the walls of the bathtub, two entirely different massages that can be used separately or together.Specification Sheets C7248 Elite Specification Sheet . Watertech-Installation-Booklet PDF Format Specifications Size: 72″x 48″ Pump: 9 amp Lifetime Warranty Blower Size: 8 amp, Variable Speed Purge Cycle: Activates twenty minutes after bath is switched off. Dries lines, manifold and injectors Hydrotherapy Spa Jets: 11 Air Injectors: 126 air ports from 18 injectors Injectors have integral watertight check valves Min/Max gallons vary, depending on bather size Includes on/off switch Includes 3 speed pressure controller (A $75 value) All water lines are plumbed completely with rigid schedule 40 PVC pipe (no flex hose) Shipping Weight: 165 lbs (price does not include shipping) An extended spout is needed if spout is wall mounted Drain included in tub price – specify finish Tub shown with optional polished brass trim